|
Originally designed to extend the life of pulse cartridge collector filters. Specifically, oily
welding smoke.
"The Injector" can be used for oily, sticky, static prone or moisture-laden debris.
It works by continually administering fine powders such as Lime, Diatomaceous Earth, or Bicarbonate
of Soda, directly into the collector, or duct system. During this process, the debris mixes with, or is absorbed by, the injected powder.
By this process, the static pressure in the collector is reduced, greatly enhancing the collectors airflow, ability to clean itself,
and increasing filter life by as much as 10 times.
 |
|
Welding
Cutting
Grinding
Sanding
Spraying
Casting
Molding |
|
 |
|
Extends the Life of Dust Collectors Filters
Neutralizes Acids and Caustics |
The standard "I.S." series Injectors are operated by compressed air. An optional 115 volt pressure
blower is available.
|
Powder Injector Models |
Model IS130 |
30 Gallon Drum - 150 lb. Capacity |
$1,247.00 |
Model IS155 |
55 Gallon Drum - 350 lb. Capacity |
$1,534.00 |
Model IS155A |
55 Gallon Drum - 350 lb. Capacity - Photohelic Controls wtih Level Sensor |
$5,300.00 |
50lb. Bags |
Pallet Load Discounts - Lime, Diatomaceous Earth,
Bicarbonate of Soda, Standard Pre-Coat |
|
The basic models are controlled by hand, however a fully automated unit is available. The automated
unit will sense the pressure drop in a collector and automatically increase or descrease the amount of powder required.
The I.S. series Injectors come in two sizes - 30 gallon and 55 gallon drums. Special sizes are
available upon request.
Though not certified or tested as a fire or explosion suppression system, the Injector can greatly
reduce the risk of collector or duct fires by creating a "Fire-Inhibiting Environment"™
Injector Layout: Example
|
